Machining
Expanding
Flange Facing
Sawing
H&S Tool products Special H&S Tool machining New H&S Tool products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
panel tube machining Emergency single tube replacement
Model J Model J
Model J Narrow head for window welds
Model J Model J
The model J is specifically designed for use in narrow openings such as dutchmans, window welds and close adjacent tubes where only a narrow head will fit. Use the J for emergency boiler repairs, panel tube machining and other pre-weld end prep projects.
 Just 1-1/2" (38.1 mm) wide, the model J fits comfortably in tight places and is easy to operate with the right angle drive and wrench feed at the back of the head. Internal locking on the model J makes it both accurate and safe.
 Standard and custom tooling is available for the model J to satisfy your specific end preparation requirements.
Single tube replacement for emergency boiler repair or small panel tube machining jobs, the model J is perfect.
Narrow head for window welds
Emergency boiler repair Bevel tubes in corners and in dutchman applications
Specifications*

Working Range: 1/2" (12.7 mm) I.D. to 2" (50.8 mm) O.D.
Pneumatic Motor: 0.9 H.P. (.66 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar)
Recommended Volume: 38 CFM (1.1 m3/min.)
Speed: 160 RPM
Minimum Working
Clearance: 1-1/2" (38.1 mm) X 12-1/2" (317.5 mm)
Weight: 10 lbs. (4.5 kg)
Length: 18" (457.2 mm)
Head Width: 1-1/2" (38.1 mm)
*Specifications are subject to change without notice.
I.D. reamer cutter makes short work of chill ring fitting and other inside counter boring applications.
Return to opening page Special H&S Tool machining New H&S Tool products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
H&S Tool / P.O. Box 393 / Wadsworth, OH 44282 USA / 330-336-4550 / Fax: 330-336-9159
© Copyright protected by H&S Tool, Inc. No unauthorized reproduction of any portion is permitted.