Machining
Expanding
Flange Facing
Sawing
H&S Tool products Special H&S Tool machining New H&S products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
Model MFT Model MFT
Model MFT mills pipes up to 12-34/" (324 mm) Model MFT mills pipes up to 12-34/" (324 mm)
Power unit can be removed from center shaft for easier handling Power unit can be removed from center shaft for easier handling
Model MFT Model MFT
The model MFT is a portable pipe machining tool that offers an exceptional power-to-weight ratio. A 14" O.D. pipe can be quickly and accurately milled with a single operator. The centershaft can be removed from the power unit and locked into the pipe which centers the tool and removes all torque from the operator. The power unit, weighing only 31 lbs.
(14.1 kgs.), is then installed on the centershaft ready to put a clean inside or outside bevel, square an uneven end cut or any of a variety of standard and custom machining jobs.
A quality flange facing attachment is also available adding versatility to this reliable tool. The flange facer will reach out to recondition flanges and bolt hole patterns as large as 20" (508 mm) O.D.
Pipe machining tools
Power unit can be removed from center shaft for easier handling
Go to flange facing Go to flange facing
MFT flange facing attachment adapts the reliable beveling machining to recondition flanges and bolt patterns up to 20" (508 mm) O.D.
Go to the flange facing page for more details.
Go to flange facing Go to flange facing
I.D. clamping pads are available in a wide range of sizes to provide secure locking in pipes with thinner walls without creating distortions.
Specifications*

Working Range: 3-1/2" (88.9 mm) I.D. to 14" (356 mm) O.D.
Pneumatic Motor: 3.0 H.P. (2.22 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar)
Recommended Volume: 65 CFM (1.9 m3/min.)
Speed: 18 RPM
Electric Motor: 1-1/2 H.P. (1.1 kW), 120/220 V, 6.0A
Speed: 0 - 32 RPM
Travel: 4-1/2" (114 mm)
Radial Tool Clearance: 16” (406.4 mm)
Weight
Power Unit, Pneumatic: 31 lbs. (14.1 kg)
Power Unit, Electric: 35 lbs. (15.9 kg)
Center Shaft: 19 lbs. (8.7 kg)
Length: 21" (533.4 mm)
*Specifications are subject to change without notice.
Return to opening page Special H&S Tool machining New H&S Tool products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
H&S Tool / P.O. Box 393 / Wadsworth, OH 44282 USA / 330-336-4550 / Fax: 330-336-9159
© Copyright protected by H&S Tool, Inc. No unauthorized reproduction of any portion is permitted.