Machining
Expanding
Flange Facing
Sawing
H&S Tool products Special H&S Tool machining New H&S Tool products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
Model OD Model OD
O.D. clamping centers and locks tool O.D. clamping centers and locks tool
Model OD Model OD
Narrow head fits in tight areas Narrow head fits in tight areas
The model OD is a beveling tool that features O.D. clamping and a narrow head design. This 1-1/2" (38.1 mm) wide head enables the replacement of a single tube, up to 2-1/4" O.D. (57.2 mm), in waterwall panels or other spaces with limited access.
The OD clamp allows for outside beveling, facing and even inside beveling for projects where the tube I.D. is too small for internal locking. It is also an ideal beveling tool for quick turnaround, single tube replacements and window weld applications.
The O.D. clamp right angle drive with wrench feed in the back of the beveling tool minimizes the amount of overhead clearance required.
O.D. clamping centers and locks tool O.D. clamping centers and locks tool
O.D. locking beveling tool O.D. locking beveling tool
Use our patented
Multi-Prep® to clean tube I.D.
Specifications*

Working Range: 3/4" (19.1 mm) I.D. to 2-1/4" (57.2 mm) O.D.
Pneumatic Motor: 0.9 H.P. (.66 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar)
Recommended Volume: 38 CFM (1.1 m3/min.)
Speed: 160 RPM
Minimum Working
Clearance: 1-1/2” (38.1 mm) X 13-1/2" (342.9 mm)
Weight: 19 lbs. (8.6 kg)
Length: 18-1/2" (469.9 mm)
Head Width: 1-1/2" (38.1 mm)
*Specifications are subject to change without notice.
Return to opening page Special H&S Tool machining New H&S Tool products H&S Tool dealers and representatives About H&S Tool Contact H&S Tool
H&S Tool / P.O. Box 393 / Wadsworth, OH 44282 USA / 330-336-4550 / Fax: 330-336-9159
© Copyright protected by H&S Tool, Inc. No unauthorized reproduction of any portion is permitted.