5 times the strength-to-weight ratio of common materials, titanium gives the model Ti more strength per pound.
The added strength is required to withstand the torque output of the exclusive custom gearing which enables the use of standard tooling as well as our patented Multi-Prep® cutting head.
This versatility is delivered with a compact head that measures just 1.6" wide. An optional locking system is available for tubes from 1/2" to 5/8" (12.7 to 63.5 mm) I.D.
Specifications*
Working Range: 1/2" (12.7 mm) I.D. to 2-1/2" (63.5 mm) O.D.
Pneumatic Motor: 0.9 H.P. (.66 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar)
Recommended Volume: 38 CFM (1.1 m3/min.)
Speed: 160 RPM
Minimum Working Clearance: 1.6" (40.6 mm) X 12-1/2" (317.5 mm)
Weight: 10 lbs. (4.5 kg)
Length: 18" (457.2 mm)
Head Width: 1.6" (40.6 mm)
*Specifications are subject to change without notice.
Working Range: 1/2" (12.7 mm) I.D. to 2-1/2" (63.5 mm) O.D.
Pneumatic Motor: 0.9 H.P. (.66 kW)
Recommended Air Pressure: 90 PSI (6.1 Bar)
Recommended Volume: 38 CFM (1.1 m3/min.)
Speed: 160 RPM
Minimum Working Clearance: 1.6" (40.6 mm) X 12-1/2" (317.5 mm)
Weight: 10 lbs. (4.5 kg)
Length: 18" (457.2 mm)
Head Width: 1.6" (40.6 mm)
*Specifications are subject to change without notice.
Multi-Prep® cutter. Multi-Prep® uses carbide inserts to bevel, clean tube O.D./remove membranes and cladding in a single process.
H&S Tool, Inc. / P.O. Box 393, Wadsworth, OH 44282 USA / 330-336-4550 / Fax: 330-336-9159
© Copyright protected by H&S Tool, Inc. No unauthorized reproduction of any portion is permitted.